Configuring Ap Firmware - Extreme Networks Summit WM3000 Series Reference Manual

CAUTION
An Access Point is required to have a DHCP provided IP address before attempting layer 3 adoption, otherwise it
will not work. Additionally, the Access Point must be able to find the IP addresses of the controllers on the
network. To locate controller IP addresses on the network:
Configure DHCP option 189 to specify each controller IP address.
Configure a DNS Server to resolve an existing name into the IP of the controller. The Access Point has to get
DNS server information as part of its DHCP information.

Configuring AP Firmware

Refer to the AP Firmware tab to view the Access Point firmware image associated with each adopted
Access Point. The screen allows you to update the firmware image for APs that associate with the
controller.
To view AP firmware information:
1 Select Network > Access Point from the main menu tree.
2 Click the AP Firmware tab.
Summit WM3000 Series Controller System Reference Guide
215