Extreme Networks Summit WM3000 Series Reference Manual page 219

.
To configure the MSTP bridge:
1 Select Network > Multiple Spanning Tree from the main menu tree.
2 Select the Bridge tab (should be the displayed tab by default).
3 Refer to the MSTP Parameter field to view or set the following:
Global MSTP Status
Max Hop Count
Supported Versions
Protocol Version
Summit WM3000 Series Controller System Reference Guide
Use the drop-down menu to define MSTP status. The default is Enabled.
Displays the maximum allowed hops for a BPDU (
Unit)
in an MSTP region. This value is used by all the MSTP instances.
Displays the different versions of STP supported.
Displays the current protocol version in use. Available MSTP protocol
versions are:
• forceNonStp
• forceLegacyDot1d
• forceDot1w
• autoDot1s
• unknown
Bridge Protocol Data
219