Extreme Networks Summit WM3000 Series Reference Manual page 246

Controller Services
1 Select Services > DHCP Server from the main menu tree.
2 Select the Host Pool tab.
3 Refer to the following information to assess whether the existing group of DHCP pools is sufficient:
Pool Name
IP Address
Hardware Address
Client Name
Client ID
4 Click the Edit button to modify the properties displayed on an existing DHCP pool. For more
information, see
5 To delete an existing DHCP pool from the list of those available, highlight the pool from within the
Pool Name field and click the Delete button.
246
Displays the name of the IP pool from which IP addresses can be issued
to DHCP client requests on this interface. The pool is the range of IP
addresses for which addresses can be assigned.
Displays the IP address for the client on this interface using the pool
name listed.
Displays the type of interface used to pass DHCP discover and request
exchanges between the controller DHCP server and DHCP Clients. The
Hardware Address field also displays the address of the DHCP client for
whom the static IP is reserved.
Displays the name of the client requesting DHCP Server support over this
interface. This name is ready only cannot be modified using the host pool
edit option.
Displays the client Identifier, based on this identifier static IP is
assigned. Hardware address and Client Identifier should not be configured
on the same host pool. A pool name cannot have both a client ID and
MAC address.
"Editing the Properties of an Existing DHCP Pool" on page 240.
Summit WM3000 Series Controller System Reference Guide