Extreme Networks Summit WM3000 Series Reference Manual page 130

Network Setup
6 Ensure Advanced is selected from within the This WLAN's Web Pages are of the drop-down menu.
Define the advanced hotspot configuration following step 5 onward in
Hotspot" on page
NOTE
For information on configuring external Radius server support for supporting a advanced hotspot, see
"Configuring External Radius Server Support" on page
7 Use the controller CLI to define the attributes of the local Radius server configuration.
The following is an example of just the CLI needed to support the local Radius server configuration:
wlan 2 enable
wlan 2 description XTRM-GUEST
wlan 2 ssid XTRM-GUEST
wlan 2 vlan 70
wlan 2 authentication-type hotspot
wlan 2 mu-mu-disallow
wlan 2 hotspot webpage-location advanced
wlan 2 radius server primary 192.168.10.14
wlan 2 radius server primary radius-key 0 ESELAB
wlan 2 radius reauth 3600
wlan 2 radius accounting server primary 192.168.10.14
wlan 2 radius accounting server primary radius-key 0 ESELAB
!
! Output Omitted
!
radius-server local
authentication eap-auth-type all
nas 192.168.10.0/24 key 0 ESELAB
ldap-group-verification disable
ca trust-point ESELAB
server trust-point ESELAB
group "Guests"
guest-group enable
130
127.
"Configuring an Advanced
133.
Summit WM3000 Series Controller System Reference Guide