Extreme Networks Summit WM3000 Series Reference Manual page 337

Sequence Number
Role Name
AP Location
ESSID
Group Name
MU MAC Address
Authentication
Summit WM3000 Series Controller System Reference Guide
Enter a sequence number to be associated with each role. Sequence
numbers determine the order that role are applied. Roles with lower
sequence numbers are applied before those with higher sequence
numbers. Sequence numbers are assigned when a role is created and
cannot be edited.
Enter a name for each role. The role name is configured when the role is
created and cannot be edited.
Select an AP Location filter, if any, to apply to the role.
Available AP Location filters are:
Exact
• : The role will only be applied to APs with the exact location
string specified in the role
• Contains : The role will be applied to APs whose location contains the
location string specified in the role
Not Contains
• : The role will be applied to APs whose location does not
contain the location string specified in the role
• Any : The role will be applied to any AP Locations
Select an ESSID filter, if any, to apply to the role.
Available ESSID filters are:
Exact
• : The role will only be applied when the exact ESSID string
specified in the role
• Contains : The role will be applied when the ESSID contains the string
specified in the role
Not Contains
• : The role will be applied when the ESSID does not
contain the string specified in the role
• Any : The role is applied to any ESSID
Select a Group Name filter, if any, to apply to the role.
Available Group Name filters are:
Exact
• : The role will only be applied when the exact Radius Group
Name string specified in the role
• Contains : The role will be applied when the Radius Group Name
contains the string specified in the role
Not Contains
• : The role will be applied to when the Radius Group
Name does not contain the string specified in the role
• Any : The role will be applied to any Radius Group Name
Configure the MU MAC Address filters, if any, applied to each role. The
MU MAC Address filter can be set to apply the role to any MU MAC
Address or a specific MU MAC Address or a MU MAC Mask.
Select an Authentication filter, if any, to apply to the role.
Available Authentication filters are:
Equals
• : The role will only be applied when the Authentication type
matches the exact Authentication method specified in the role
Not Equals
• : The role will only be applied when the Authentication type
does not match the exact Authentication method specified in the role
Any
• : The role will be applied to any Authentication type
337