Chapter 7: Controller Security; Displaying The Main Security Interface - Extreme Networks Summit WM3000 Series Reference Manual

7 Controller Security
This chapter describes the security mechanisms available to the controller. This chapter describes the
following security configuration activities:
Displaying the Main Security Interface on page 309
●
AP Intrusion Detection on page 310
●
Configuring Firewalls and Access Control Lists on page 319
●
Configuring NAT Information on page 356
●
Configuring IKE Settings on page 366
●
Configuring IPSec VPN on page 374
●
Configuring the Radius Server on page 396
●
Creating Server Certificates on page 411
●

Displaying the Main Security Interface

Refer to main Security interface for a high level overview of device intrusion and controller access
permission options.
NOTE
When the controller's configuration is successfully updated (using the Web UI), the affected screen is closed without
informing the user their change was successful. However, if an error were to occur, the error displays within the
affected screen's Status field remains displayed. In the case of file transfer operations, the transfer screen remains
open during the transfer operation and remains open upon completion (with status displayed within the Status field).
To view main menu security information:
Summit WM3000 Series Controller System Reference Guide
309