Extreme Networks Summit WM3000 Series Reference Manual page 293

Profile Name
Start IP Address
End IP Address
SNMP Version
3 Select an existing profile and click the Edit button to modify the profile name starting and ending IP
address and SNMP version. Extreme Networks recommends editing a profile only if some of its
attributes are still valid, if the profile is obsolete, delete it and create a new one.
4 Select an existing profile and click the Delete button to remove this profile from the list of available
profiles.
5 Click the Add button to display a screen used to define a new controller discovery profile. For more
information, see "Adding a New Discovery Profile" on page
6 Click the Start Discovery button to display a Read Community String (SNMP v2) or V3 Authentication
(SNMP v3) screen.
When Start Discovery is selected, the controller prompts the user to verify their SNMP credentials
against the SNMP credentials of discovered devices. SNMP v2 and v3 credentials must be verified
before the controller displays discovered devices within the Recently Found Devices table.
If SNMP v2 is used with a discovering profile, a Read Community String screen displays.The
Community String entered is required to match the name used by the remote network management
software of the discovered controller
.
If SNMP v3 is used with a discovering profile, a V3 Authentication screen displays. The User Name
and Password are required to match the name used by the remote network management software of
the discovered controller
Summit WM3000 Series Controller System Reference Guide
Displays the user-assigned name for the profile. The profile name should
associate the profile with the group of devices or area where the
discovered devices are anticipated to be located.
Displays the starting numeric (non DNS) IP address from where the
search for available network devices is conducted.
Displays the ending numeric (non DNS) IP address from where the search
for available network devices is conducted.
Displays the version of the SNMP (either SNMP v2 or v3) used for
discovering available network devices.
295.
293