Extreme Networks Summit WM3000 Series Reference Manual page 469

To review the current panic snapshots on the controller:
1 Select Diagnostics > Panic Snapshots from the main menu.
2 Refer to the following table headings within the Panic Snapshots screen:
Name
Size
Created
3 Refer to the Preview field for panic information in ASCII text. When a panic file is selected, the
corresponding text is displayed in the preview screen and the name of the file displays. Use this
information as a high-level overview of the panic.
4 Select a target panic file and click the Delete button to remove the file.
5 Select a target panic file and click the View button to open a separate viewing screen to display the
panic information in greater detail. For more information, see
6 Click the Transfer Files button to open the transfer dialogue to transfer the file to another location. For
more information, see
Summit WM3000 Series Controller System Reference Guide
Displays the title of the panic file. Panic files are named n.panic where n
is in the range 0-9. 0 is always the oldest saved panic file and the
highest number is the most recent. If the system experiences a panic,
there are ten existing panics, the oldest is deleted and the remaining nine
are renamed so the newest can be saved as 9.
Displays the size of the panic file in bytes.
Displays the date and time the panic file was created. The panic file is
created after the system reboots, however the panic information within
the file contains the date and time the panic actually occurred.
"Transferring Panic Files" on page
"Viewing Panic Details" on page
470.
470.
469