Transferring A File From A Wireless Controller To A Server - Extreme Networks Summit WM3000 Series Reference Manual

4 Use the Browse button to define a location for the transferred file.
5 Click the Transfer button to complete the file transfer.
6 The Message section in the main menu area displays the file transfer message.
7 Click Abort at any time during the transfer process to abort the file transfer.

Transferring a file from a Wireless Controller to a Server

To transfer a file from the controller to a Server:
1 Refer to the Source field to specify the source file. Use the From drop-down menu and select Wireless
Controller.
2 Use the Browse button and select a file for transfer.
3 Use the To drop-down menu (within the Target field) and select Server. This defines the transfer
location of the configuration file. Enter the file location marked to store the transferred file.
4 Use the Using drop down-menu to configure whether the log file transfer is conducted using FTP,
TFTP, HTTP or SFTP. This field display the default port for FTP,TFTP, HTTP or SFTP. The value in
this field can be configured as required. Enter the IP Address of the server receiving the source
configuration. Ensure the IP address is valid or risk jeopardizing the success of the file transfer. Enter
the User ID credentials required to transfer the configuration file from a FTP server.
NOTE
On the Summit WM3700 users can also transfer files using USB or Compact Flash. On the Summit WM3600 users
can also transfer files using USB.
Summit WM3000 Series Controller System Reference Guide
75