Chapter 6: Controller Services; Displaying The Services Interface - Extreme Networks Summit WM3000 Series Reference Manual

6 Controller Services
This chapter describes the Services main menu information available for the following controller
configuration activities.:
Displaying the Services Interface on page 237
●
DHCP Server Settings on page 238
●
Configuring Secure NTP on page 259
●
Configuring Controller Redundancy and Clustering on page 270
●
Layer 3 Mobility on page 284
●
Configuring Controller Discovery on page 291
●
Locationing on page 298
●

Displaying the Services Interface

Refer to the Services main menu interface to review a summary describing the availability of several
central features within the Services main menu item.
NOTE
When the controller's configuration is successfully updated (using the Web UI), the affected screen is closed without
informing the user their change was successful. However, if an error were to occur, the error displays within the
affected screen's Status field. In the case of file transfer operations, the transfer screen remains open during the
transfer operation and remains open upon completion (with status displayed within the Status field).
To display a Services Summary:
1 Select Services from the main menu tree.
2 Refer to the Services Summary field for the following information relating to configurable values
within the Services main menu item.
DHCP Servers
Summit WM3000 Series Controller System Reference Guide
Displays whether DHCP is enabled and the current configuration. For
information on configuring DHCP Server support, see
Settings" on page 238.
"DHCP Server
237