Modifying An Existing Local User - Extreme Networks Summit WM3000 Series Reference Manual

Super User
NOTE
There are some basic operations/CLI commands (exit, logout and help) available to all user roles. All the roles
except Monitor can perform Help Desk role operations.
6 Select the access modes to assign to the new user from the options provided in the Access Modes
panel. Select one or more of the following options:
Console
SSH
Telnet
Applet
NOTE
When establishing a connection to the controller using SSH, ensure that traffic can pass on TCP port 22
between the client and the controller.
NOTE
When establishing a connection to the controller using Telnet, ensure that traffic can pass on TCP port 23
between the client and the controller.
NOTE
When establishing a connection to the controller's applet, ensure that traffic can pass on TCP port 80 for HTTP
access and TCP port 443 for HTTPS between the client and the controller.
7 Refer to the Status field for the current state of the requests made from applet. This field displays
error messages if something goes wrong in the transaction between the applet and the controller.
8 Click the OK button to create the new user.
9 Click Cancel to revert back to the last saved configuration without saving any of your changes.

Modifying an Existing Local User

To create a new local user:
1 Select Management Access > Users from the main menu tree.
2 Select a user from the Users list and click the Edit button.
3 The Username field is read-only field and displays the login name of the user.
4 Enter the new authentication password for the user in the Password field and reconfirm within the
Confirm Password field.
5 Select the user role from the options provided in the Associated Roles field. Select one or more of the
following options:
Summit WM3000 Series Controller System Reference Guide
Super User
Select to assign complete administrative rights.
This option provides the new user access to the controller using the console.
This option provides the new user access to the controller using SSH.
This option provides the new user access to the controller using a Telnet
session.
This option provides the new user access to the controller through the Web UI
(applet).
445