Extreme Networks Summit WM3000 Series Reference Manual page 190

Network Setup
3 To select the time frame for the radio statistics, select either Last 30s or Last Hr above the statistics
table.
Select the Last 30s radio button to display statistics for the last 30 seconds for the radio.
●
Select the Last Hr radio button to display statistics from the last hour for the radio.
●
4 Refer to the table for the following information:
Index
Description
Type
MUs
Throughput Mbps
ABS
RF Util
% Non-UNI
190
Displays the numerical index (device identifier) used with the radio. Use
this index (along with the radio name) to differentiate the radio from
other device radios.
Displays the name used with the radio. Use this name (along with the
radio index) to differentiate the radio from other device radios.
Identifies whether the radio is an 802.11a radio or an 802.11 bg radio.
Displays the number of MUs currently associated with the Access Point.
Displays the average throughput in Mbps for the selected radio. The Rx
column displays the average throughput in Mbps for packets received on
the selected radio. The Tx column displays the average throughput for
packets sent on the selected radio.
Displays the average bit speed in Mbps on the selected Access Point.
This value includes packets both sent and received.
Displays the percentage of the total packets for the selected radio that
are non-unicast packets. Non-unicast packets include broadcast and
multicast packets.
Displays the percentage of packets for the selected radio that are non-
unicast packets. Non-unicast packets include broadcast and multicast
packets.
Summit WM3000 Series Controller System Reference Guide