LED Codes
NOTE
During controller start up, the Temperature status LED will be lit Solid Amber. This is normal
behavior and does not indicate an error. At the completion of start up the Temperature Status LED
will switch to Solid Green.
Controller Status (Primary System)
System Status 1 LED
Off
Green Solid
Green Solid
Green Solid
Controller Status (Redundant System)
System Status 1 LED
Off
Green Solid
Green Blinking
Green Blinking
Green Solid
12
System Status 2 LED
Off
Off
Green Solid
Amber Blinking
System Status 2 LED
Off
Off
Green Solid
Alternating Green
Blinking & Amber
Blinking
Amber Blinking
Summit WM3700 Wireless LAN Controller Installation Guide
Event
Power off
No Redundancy Feature Enabled
Redundancy Feature Enabled
Actively Adopting Access Points
No License to adopt Access Points or No
Country Code configured on the controller.
Event
Power off
No Redundancy Feature Enabled
Redundant System failed over and
adopting ports
Redundant System not failed over.
No License to adopt Access Points or No
Country Code configured on the controller.