Dell Networking 7048 Reference Manual page 1282

Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the link state database
when OSPFv3 is enabled.
console#show ipv6 ospf database
Adv Router
-------------- --------------- ----- -------- ---- ------- -------
1.1.1.1
2.2.2.2
Adv Router
-------------- --------------- ----- -------- ---- ------- -------
2.2.2.2
Adv Router
-------------- --------------- ----- -------- ---- ------- -------
1.1.1.1
2.2.2.2
1.1.1.1
2.2.2.2
1282
OSPFv3 Commands
Router Link States (Area 0.0.0.0)
Link Id
0
0
Network Link States (Area 0.0.0.0)
Link Id
636
Inter Network States (Area 0.0.0.0)
Link Id
1
1
2
2
Link States (Area 0.0.0.0)
Age Sequence Csum Options Rtr Opt
4 80000034 54BD V6E--R- ----B
2 80000044 95A5 V6E--R- ----B
Age Sequence Csum Options Rtr Opt
636 80000001 8B0D V6E--R-
Age Sequence Csum Options Rtr Opt
323 80000001 3970
322 80000001 1B8A
293 80000001 3529
375 80000001 FC5E