Return Codes For Hitachi Command Suite Common Agent Component - Hitachi XP P9500 User Manual

Message ID
KAPL15401-I
KAPL15402-E
KAPL15403-I
KAPL15404-W The HDLM Manager was
Return Codes for Hitachi Command Suite Common Agent
Component
When an operation requested of HDLM from Global Link Manager terminates
abnormally, or terminates normally with a warning, HDLM outputs one of the
return codes described below.
Message ID
1002
1003
1004
1006
1007
8-134
Message Text
HDLM Manager successfully
started.
Could not start the HDLM
manager.
HDLM Manager successfully
stopped.
executed by the user who does
not have the authority.
Details
There is no path on which the operation can be performed.
Action
Refresh the host information, check the path status, and
then perform the operation again.
Details
No path was detected.
Action
Check whether a path between the host and the storage
system is connected. If a path is connected, check whether
HDLM is configured correctly.
Details
Memory required for HDLM internal processing could not be
allocated.
Action
Terminate unnecessary applications to increase free
memory, or restart the host.
Details
An Offline path cannot be placed Online.
Action
Remove the error in the path, and then retry.
Details
The target path of the offline operation is the last,
remaining path connected to the device and therefore,
cannot be placed in the offline status.
Messages
Hitachi Dynamic Link Manager User Guide (for Linux(R))
Explanation
-
-
-
-
Explanation