Return Codes For Hitachi Command Suite Common Agent Component - Hitachi XP P9500 User Manual

Message ID
KAPL15208-W aa...aa path(s) were failed to
KAPL15401-I
KAPL15402-W Could not start the HDLM
KAPL15403-I
KAPL15404-W The HDLM Manager was
Return Codes for Hitachi Command Suite Common Agent
Component
When an operation requested of HDLM from Global Link Manager terminates
abnormally, or terminates normally with a warning, HDLM outputs one of the
return codes described below.
Message ID
1002
1003
1004
Message Text
cc...cc path(s) could not be
placed bb...bb.
place bb...bb.
HDLM Manager successfully
started.
manager.
HDLM Manager successfully
stopped.
executed by the user who does
not have the authority.
Details
There is no path on which the operation can be performed.
Action
Refresh the host information, check the path status, and then
perform the operation again.
Details
No path was detected.
Action
Check whether a path between the host and the storage system is
connected. If a path is connected, check whether HDLM is configured
correctly.
Details
Memory required for HDLM internal processing could not be allocated.
Action
Hitachi Dynamic Link Manager User Guide (for Windows(R))
aa...aa: Number of paths that
were successfully placed online or
offline
bb...bb: Online or Offline
cc...cc: Number of paths that
failed to be placed online or offline
Details
aa...aa: Number of paths that
failed to be placed online or offline
bb...bb: Online or Offline
Explanation
Messages
Explanation
-
-
-
-
8-105