Removal and Replacement
Front Door Assembly–HP-qualified personnel only
Front Door Assembly–HP-qualified personnel only
To replace the front door (See
1.
Open the door to a position 90 degrees from the closed position.
2.
Center the top hinge pin in the top slot of the door.
3.
Push the door top outward, so the hinge pin exits through the perpendicular slot.
4.
Pull the door up and free it from the bottom hinge pin.
5.
Replace the door by dropping the lower door mounting hole onto the lower hinge pin.
6.
Swing the upper corner mounting slot into the upper hinge bracket pin until it snaps into place.
192
Figure
31):
Figure 31. Replacing the Front Door