HP Surestore Disk Array 12h - And FC60 Service Manual page 137

Event Event Name
Number
(DEC/hex)
Invalid Opcode
6/0x06
Invalid Bit In
7/0x07
CDB
Logical Block
8/0x08
Address Out Of
Range
Not Ready
9/0x09
Invalid Identify
10/0x0a
Received
Power On Unit
11/0x0b
Attention
Event Predictive
Logged Maintenance
Implication
N NA
N NA
N NA
N NA
N NA
N NA
Event Code Descriptions
Suspected Description
Components
None A SCSI invalid opcode error
occurred. See the SCSI
Command Specification for
more information.
NOTE. In certain disk array
states, this event may occur
even if the opcode is valid.
These are typically states that
indicate a larger problem with
the disk array.
None Invalid bit in CDB. See the
SCSI Command Specification
for more information.
None The specified logical block
address was out of range. See
the SCSI Command
Specification for more
information.
None Not Ready, Init command
required.
None Invalid Identify Received. See
the SCSI Command
Specification for more
information.
None Power on unit attention. See
the SCSI Command
Specification for more
information.
Troubleshooting
137