HP Surestore Disk Array 12h - And FC60 Service Manual page 182

Troubleshooting
Event Code Descriptions
Event Event Name
Number
(DEC/hex)
Secondary
218/0xda
Controller
Failed With
Communication
Timeout
Member Disk
219/0xdb
Drive Added
Back Into Disk
Set
Controller
220/0xdc
Initiated Host
SCSI Reset
182
Event Predictive
Logged Maintenance
Implication
Y See
accompanying
errors
Ignore -
Y
Operator or
host activity
Y Ignore
Suspected Description
Components
Controller A controller was discovered to
Backplane be bad during power on.
Specifically, the secondary
controller appears to have
failed due to its failure to
respond within the message
timeout period.
None The controller has detected
that a member of the disk set
that was either down, failed,
or missing has been returned
to the ready state. This can
occur as a result of a Add
Physical Drive command, or a
hot plug installation of the
drive.
The disk drive ID number
assigned to the drive added
appears in the component
identifier field of this log
entry.
None The controller is going to
initiate a Host channel SCSI
reset. This will occur if the
controller detects that the
channel has not already seen a
reset, and DRR (Disable
Remote Reset) indicates that a
SCSI reset should be
generated.