Using Control Panel Menus - HP Surestore Disk Array 12h - And FC60 Service Manual

Using Control Panel Menus

Table 2 shows all of the control panel main menus, except the Shutdown menu, which has no menu items.
Note that some words have been abbreviated to fit the display window, such as the word "Cntrl" for
"Controller," "L-Drv" for "Logical Drive," and "ActivSpare" for "Active Hot Spare."
When the display panel shows that the disk array is "Ready," it may also display an alias name for the disk
array (if one has been defined). An alias must be defined with the Array Management (ARM) Utility as
described in the System Administrator's Guide, which is shipped with each disk array.
1
Language
Cntrl Changes
Deutsch SCSI ID
2
English Switch Cntrl
Espanol Reset Cntrl
Francais Format Array
Italiano Parity
SDTR
WDTR
Term Power
Unit Attn
3
Mark Log Disk
3
Post Log Disk
Copy Firmware
Recover
Note 1: English Language menu shown
Note 2: Only if two controllers installed
Note 3: Only if Manufacturer Log Disk is installed
Table 2. Control Panel Main Menus
Disk Changes
Include Disk
Auto Include
Auto Rebuild
ActivSpare
Start Rebuild
Stop Rebuild
DRR
VEB
Operating the Control Panel
Using Control Panel Menus
L-Drv Changes View Settings
Create L-Drv System State
Delete L-Drv Warnings
Renumber L-Drv Primary Cntrl
SCSI ID x
SCSI ID y
Firmware
Array S/N
SCSI Values
Auto Include
Auto Rebuild
ActivSpare
Number of Disks
Disk States
Rebuild
SIMMs Installed
MBytes of RAM
L-Drv States
75