Hp Storeonce 4900 Backup; Front View Of The Hp Storeonce 4900 Backup - HP StoreOnce 4900 Backup Installation And Configuration Manual

HP StoreOnce 4900 Backup

Table 3 HP StoreOnce 4900 models
Product model
HP StoreOnce 4900
48TB Backup,
BB903A
BB908A
BB904A

Front view of the HP StoreOnce 4900 Backup

Figure 1 Front view of the HP StoreOnce 4900 Backup
1. Head server
3. 1U support shelf
5. Drawer 1 (left-hand side of enclosure)
WARNING!
disk enclosure below the head server unit. If the second disk enclosure is installed above the head
server unit, the 1U support shelf supplied with the disk enclosure should be installed immediately
above the head server unit to protect it from the weight of the disk enclosure
16 Before you start
Description
A head server unit
with two 1TB disks
and a pre-configured
two-drawer disk
enclosure with eleven
4TB disks and four hot
spare disks
1 1–disk expansion kit
One additional disk
enclosure with 1 1+4
spare pre-configured
storage
If a second disk enclosure is to be installed, HP recommends installing the second
Interfaces supported Ports
iSCSI and FC 4 x 1GbE ports 4 x
10GbE ports4 x FC
ports
2. Disk enclosure
4. Drawer 2 (right-hand side of enclosure)
Storage expansion
1. Up to five 1 1–disk
expansion kits for
the first disk
enclosure,
BB908A2.
2. When the first
enclosure is full,
one additional disk
enclosure with
1 1+4 spare
pre-configured
storage, BB904A.
This can also be
expanded with up
to five 1 1–disk
expansion kits,
BB908A.