Control Panel Status Light Operation; Selecting A Menu Item; Returning To The Main Menu - HP Surestore Disk Array 12h - And FC60 Service Manual

Operating the Control Panel

Control Panel Status Light Operation

Control Panel Status Light Operation
When first powered on, the disk array controller performs an extensive self-test. At first, a memory test is
performed. During the memory test, the control panel status light will remain off for about one minute.
Then a build process occurs. During the build process, the control panel status light is amber for about
twenty seconds. At this time, the power-on self-test is finished, and now the control panel status light
flashes green with input/output (I/O) activity.
If the power-on self-test passed successfully, the indicator will flash green with I/O activity. If any part of
the disk array does not pass self-test, or if a problem occurs, the control panel status light will be amber
(solid or flashing).
Table 1. Control Panel Status Light Indications
Color
Off No power, disk array not available, or initializing.
Solid Green Disk array Ready.
Solid Amber Disk array self-test or disk array Fault.
Random Flashing Green Disk array I/O (input/output) activity.
Random Flashing Amber Disk array I/O (input/output) activity. Warning Mode.

Selecting a Menu Item

When using the control panel, follow these steps:
1. Press MENU to select the main menu.
2. Press + or – to scroll through to a menu.
3. Press ENTER to select a menu.
4. Press + or – to scroll through to a menu item.
5. Press ENTER to select a menu item.
6. Press + or – then press ENTER to select values for a task, enable/disable, and confirm/cancel.

Returning to the Main Menu

To return to the main menu, press Cancel.
70
Indication