Disk, Power, And Fan Modules - HP Surestore Disk Array 12h - And FC60 Service Manual

Disk, Power, and Fan Modules

Use the same installation procedure to install power modules and fan modules. See
where to install the module.
module, open the front door and follow these steps:
CAUTION! The module lever must be pulled all the way out or the module will jam in the
slot upon insertion. Also, always handle the disk modules carefully when they are out of
the disk array enclosure, since they are susceptible to shock and vibration.
When removing a disk module, pull it only part of the way out of the enclosure first, then
wait 30 seconds for the disk spindle to spin down before fully removing the disk module.
This will avoid damaging gyroscopic effects between the disk surfaces and heads.
1. Pull out the module lever.
2. Insert the module into the disk array.
3. Push in the module lever to lock the module in place.
Figure 6 shows how to install a disk module. To install a disk, power, or fan
Figure 6. Installing a Disk Module
Product Description
Installing Modules
Figure 5 to determine
21