Deleting A Logical Drive; Including A Disk; Enabling/Disabling Auto Include; Enabling/Disabling Auto Rebuild - HP Surestore Disk Array 12h - And FC60 Service Manual
Hp surestore e disk array 12h user's and service manual (c5445-90901, september 1999)
Hide thumbs
Also See for Surestore Disk Array 12h - And FC60:
- Service manual (746 pages) ,
- Advanced user's manual (466 pages) ,
- User manual (310 pages)
Table of Contents
Advertisement
Operating the Control Panel
Using the Control Panel Buttons
Deleting a Logical Drive
CAUTION! Deleting a logical drive (LUN) destroys all data on the logical drive. Before
deleting a logical drive, make backup copies of the files you want to save or move the files
to another logical drive.
1. Select the Logical Drv Changes from the main menu.
2.
Select Delete L-Drv.
3.
Select a drive number 0 to 7.
4. Select Confirm.
Including a Disk
1. Select the Disk Changes from the main menu.
2. Select Include Disk.
3.
Select a disk number A1 to A6 or B1 to B6.
4. Select Confirm.
Enabling/Disabling Auto Include
1. Select the Disk Changes from the main menu.
2.
Select Auto Include.
3.
Select Enable or Disable.
4. Select Confirm.
Enabling/Disabling Auto Rebuild
1. Select the Disk Changes from the main menu.
2.
Select Auto Rebuild.
3.
Select Enable or Disable.
4. Select Confirm.
Starting/Stopping a Rebuild
1. Select the Disk Changes from the main menu.
2.
Select Start Rebuild or Stop Rebuild.
72
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Surestore Disk Array 12h - And FC60 and is the answer not in the manual?