Modifying Image Content - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

Extracting Content as an Add-on Image
To extract a file or directory from the open image as an add-on image:
1 Click File > Open.
For Windows, the default image location should open (
For Linux, the file browser opens to the
directory to access the image file.
images
2 Browse for and select the image file.
Large image files might take a few moments to open.
3 Click File > Save.
If any changes have been made, this must be done before you can extract the information.
4 Click File > Extract > As Add-on Image.
5 Specify the name and location of the new add-on image, then click OK.
Creating an Add-on Image
You can create an add-on image from existing directories and files on your system and add partitions
to the new add-on image.
1 Click File > New.
2 To add a partition, click the root of the image, click Image, then click Create Partition.
You cannot add a partition to an existing image.
3 Do any of the following to add content:
Browse to the directories and files you want the add-on image to contain, then drag or
copy the directories and files into the right pane from your file browser.
Click Image > Add Files and select the files to be added.
Click Image > Add Directory and select the directories to be added.
Click the Add Directory icon and select the directories to be added.
Click the Add File icon and select the files to be added.
4 Click File > Save As, then specify the filename of the add-on image, including the
filename extension.
For Windows, the default image location should open (
For Linux, the file browser opens to the
directory for saving the file.
images
If you have a subdirectory structure under
file.
E.1.9 Modifying Image Content
You can modify the content of an image file in the following ways:
"Adding Directories and Files" on page 192
"Creating a New Directory" on page 192
"Creating a New Partition" on page 192
...\content-repo\images
directory; you need to click the
.../content-repo
...\content-repo\images
directory; you need to click the
.../content-repo
, browse for where to save the new image
images
).
.zmg
).
Imaging Utilities and Components 191
/
/