Starting A Manual Multicast Session; Tftp Client For Winpe - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

The information in
Table E-14
Statistic
PXE Requests
Images Sent
Images
Received
E.8.3 Starting a Manual Multicast Session
At the imaging maintenance mode prompt, you can start a manual multicast session, see any
sessions in progress, and delete sessions. For more information, see
from Each Client" on page
E.9 TFTP Client for WinPE
The TFTP client for WinPE can be used to download files from the TFTP directory on the
ZENworks Server. The client can be used to download the Microsoft ImageX third-party imaging
engine from the ZENworks Server. ImageX can later be used to perform advanced imaging
operations that are not directly supported by ZENworks.
To install and use the TFTP client for WinPE:
1 Boot to WinPE maintenance mode.
2 Install the TFTP client for WinPE by running
\windows\system32\tftpclientapplication.exe
3 To download the files from the TFTP directory on the ZENworks Server, use the following
command:
TFTPClientApplication GET IP_address_of_the_TFTP_server source_filename [-n
destination_filename
NOTE: If the destination filename is not specified, the file is created with the source filename.
216 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
Table E-14 explains what is displayed:
Imaging Request Statistics
Specifies
The number of imaging requests of any kind that have been received by the Imaging
Server since it was last started. This includes requests that failed, were denied, or were
referred to other Imaging Servers. Information about each of these requests, such as
the source, type, date/time, and results, is logged on the Imaging Server.
The number of images that the Imaging Server has sent to imaging clients since the
Imaging Server was last started. This includes only images that were retrieved from
this Imaging Server.
The number of new images that have been received and stored on the Imaging Server
since it was last started. This includes images that were received through client
referrals.
130.
]
"Initiating a Multicast Session
.