Setting Up Devices To Use Imaging Bundles - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

1.1.5 Setting Up Devices to Use Imaging Bundles

In order for a device to automatically use an assigned Imaging bundle, you must complete two tasks:
"Setting Up the Device to Apply the Bundle" on page 16
"Assigning a Bundle" on page 16
Setting Up the Device to Apply the Bundle
Preboot Services utilizes PXE and other boot mechanisms and media to trigger the imaging work.
For information, see
Imaging," on page
Assigning a Bundle
You can assign an Imaging bundle to devices, their parent folder, or a device group.
The following paths represent many of the methods for assigning bundles to devices, or devices to
bundles:
"To Device Folders" on page 16
"To Device Groups" on page 16
"To Individual Devices" on page 16
To Device Folders
Click Devices > select the check box next to a folder, then click Action > Assign Bundle.
Where you have selected the Servers and Workstations folders' check boxes, you can assign
bundles to all of the devices contained under the Servers and Workstations folders.
Click Devices > select the check box next to Servers, then click Action > Assign Bundle.
You can assign bundles to all of the devices in the Servers folder.
Click Devices > select the check box next to Workstations, then click Action > Assign Bundle.
You can assign bundles to all of the devices in the Workstations folder.
To Device Groups
Click Devices > Servers > select the check boxes next to one or more server groups, then click
Action > Assign Bundle.
You can assign bundles to all servers that are members of the selected server groups.
Click Devices > Workstations > select the check boxes next to one or more workstation groups,
then click Action > Assign Bundle.
You can assign bundles to all workstations that are members of the selected workstation
groups.
To Individual Devices
Click Devices > Servers > select the check boxes next to one or more servers, then click Action
> Assign Bundle.
You can assign bundles to all selected servers.
16 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
Section 2.3, "Setting Up the Preboot Services Methods for ZENworks
46.