Configuring Novell Preboot Services Menu Options - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

Section 2.5.2, "Configuring Non-Registered Device Settings," on page 75
Section 2.5.3, "Configuring Device Imaging Work Assignments," on page 79
Section 2.5.4, "Configuring the Server Referral List," on page 90
Section 2.5.5, "Configuring Intel Active Management Technology (AMT)," on page 94

2.5.1 Configuring Novell Preboot Services Menu Options

The Novell Preboot Services Menu provides options for how Preboot Services can be used on your
devices. The following options are presented when the menu is displayed:
Novell Preboot Services Menu Options
Table 2-6
Menu Option
Start ZENworks Imaging
Start ZENworks Imaging
Maintenance
Disable ZENworks Partition
Enable ZENworks Partition
Exit
Generally, if your Preboot Services work is completely automated, you should select to never
display the Novell Preboot Services Menu on the device when it boots. Conversely, if you need to do
manual Preboot Services functions for some or all devices, then select to always display the menu. A
compromise is where you select to display the menu if Ctrl+Alt is pressed, allowing unattended
Preboot Services work while allowing you the opportunity to display the menu when needed.
IMPORTANT: PXE must be enabled on the device for the menu to be displayed.
To determine whether the Novell Preboot Services Menu is displayed on your devices when they
boot:
1 In ZENworks Control Center, click Configuration in the left pane to display the Configuration
tab, then if it's not expanded, click Management Zone Settings.
2 Click Device Management to expand its listing, then select Preboot Services to display the
configuration sections.
3 Locate and expand the
74 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
Function
Executes the assigned Preboot Services imaging bundles.
Displays the imaging maintenance mode prompt, where you can
execute imaging commands.
Prevents an existing ZENworks partition from being used when booting
to execute the assigned Imaging bundles.
Allows an existing ZENworks partition to be used when booting to
execute the assigned Imaging bundles.
Resumes booting of the device without doing any Imaging bundle work.
Preboot Menu Options section: