Modifying Image Content; Adding Directories And Files; Creating A New Directory - Novell ZENWORKS LINUX MANAGEMENT 7.3 IR2 - ADMINISTRATION GUIDE 02-12-2010 Administration Manual

4 Click File > Save As, then specify the filename of the add-on image, including the
filename extension.

31.8 Modifying Image Content

You can modify the content of an image file in the following ways:
Section 31.8.1, "Adding Directories and Files," on page 475
Section 31.8.2, "Creating a New Directory," on page 475
Section 31.8.3, "Creating a New Partition," on page 476
Section 31.8.4, "Resizing a Partition," on page 476

31.8.1 Adding Directories and Files

To add directories and files to the open image:
1 Click File > Open.
2 Browse for and select the image file.
Large image files might take a few moments to open.
3 Do any of the following to add content:
Browse for the directories and files you want the add-on image to contain, then drag or
copy the directories and files into the right pane from your file browser.
Click Image > Add Files and select the files to be added.
Click Image > Add Directory and select the directories to be added.
Click the Add Directory icon and select the directories to be added.
Click the Add File icon and select the files to be added.
4 Brows for and select the files or directory, then click Add or OK.
You can select multiple files using the Shift and Ctrl keys.
5 Repeat these steps as necessary.

31.8.2 Creating a New Directory

To create a directory in the open image:
1 Click File > Open.
2 Browse for and select the image file.
Large image files might take a few moments to open.
3 Browse for the partition or directory in the left pane where you want to create the directory,
then click Image > Create Directory.
You can also click the New Directory icon.
4 Specify the name of the directory, then click OK.
.zmg
Imaging Utilities and Components 475