Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual page 176

A list of partitions available on the device, total disk space, and the free disk space on the
device is displayed. Select the disk whose partition you want to modify.
Note: The drives displayed might not correlate with the original drives of the device. You must
manually ensure that the correct drive is selected.
2 To create a Primary or Extended partition, click Add. To create a Logical partition, select an
Extended partition, then click Add.
The Add Partition window is displayed.
3 Configure the following settings:
File System Type: (Not applicable for the Extended partition) Select the file system type
for the device.
Partition Type: Select the partition type to be created.
Size: Specify the size of the partition. By default, it is the free space available on the disk
beyond the specified offset value for the Primary or Extended partition, and the free space
available beyond the specified offset value within the Extended partition for the Logical
partition.
Drive Letter: (Not applicable for the Extended partition) Select the letter to represent the
partition.
OffSet: Specify the offset of the disk to determine the starting position of the partition. By
default, it is the offset of the first available free space on the disk for the Primary or
Extended partition, and it is the offset of the first available free space within the extended
partition for the Logical partition.
4 Click OK.
176 ZENworks 10 Configuration Management Preboot Services and Imaging Reference