Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual page 240

Menu item or parameter
System Information >
Image Safe Data
or
img -info -zisd (from the
imaging maintenance
mode prompt)
Examples
Table F-17
Example
img -info -hardware
img -info -zisd
240 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
Action
Lists the data currently stored in the image-safe area on the device. The
items that comprise this data are listed in
Viewer and Editor (zisview and zisedit)," on page
In addition to the image-safe data, the last base image that was restored on
the device is also listed.
Information Mode Examples
Explanation
Lists the detected hardware devices on the device.
Lists the Configuration Management image-safe data currently stored on the
device and the last base image that was restored.
Section E.4, "Image-Safe Data
198.