Disabling The Sidchanger; Image-Safe Data Viewer And Editor (Zisview And Zisedit) - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

E.3.3 Disabling the SIDchanger
You must disable the ZENworks SIDchanger by using either ziswin or Image Explorer if you want
to use a third-party tool such a SYSPREP to change the SID.
"Using Ziswin to Disable the SIDchanger" on page 198
"Using Image Explorer to Disable the SIDchanger" on page 198
Using Ziswin to Disable the SIDchanger
You can use ziswin to disable the SIDchanger only for managed devices. Do the following before
taking the image:
1 In ziswin, click Edit > Options > Restore Mask.
2 Select Windows SID.
This creates a hidden
contents:
<ISDConf>
<DoNotRestoreMask>
<SID>true</SID>
</DoNotRestoreMask>
</ISDConf>
To disable the SIDchanger, ensure that the value of
the SIDchanger, set the value to false.
Using Image Explorer to Disable the SIDchanger
1 Create the
<ISDConf>
<DoNotRestoreMask>
<SID>true</SID>
</DoNotRestoreMask>
</ISDConf>
2 Open the image to be restored in the Image Explorer, then add the
the system drive of the image.
3 Save the image.
E.4 Image-Safe Data Viewer and Editor (zisview
and zisedit)
After booting a device from an imaging boot media (PXE, CD, DVD, or ZENworks partition), you
can enter
zisedit
image-safe data for that device.
The following sections contain additional information:
Section E.4.1, "Information Displayed by the Image-Safe Data Viewer," on page 199
Section E.4.2, "Using the Image-Safe Data Viewer," on page 200
Section E.4.3, "Using the Image-Safe Data Editor," on page 201
198 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
restoremask.xml
file, with the following contents:
restoremask.xml
and at the imaging maintenance mode prompt to edit and view the
zisview
system file in the system drive, with the following
is set to true. If you want to enable
<SID>
file to
restoremask.xml