Action - Zenworks Image; Adding A Zenworks Image; Editing A Zenworks Image - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

2 If necessary, change the number of clients needed in order to start the multicast session.
3 If necessary, change the time to wait before starting a multicast session if not enough clients
have connected.
4 As necessary, edit the Items to be Included in the Multicast Session field.
You can add or remove items, edit existing items, or change their order of execution.
5 Click OK to save the changes.
A.4 Action - ZENworks Image
Depending on which dialog box you accessed, you can either add a new ZENworks Image action to
the current bundle's Preboot actions, or edit an existing ZENworks image.
Section A.4.1, "Adding a ZENworks Image," on page 151
Section A.4.2, "Editing a ZENworks Image," on page 151
A.4.1 Adding a ZENworks Image
1 Specify an image name in the Action Name field.
2 In the ZENworks Image File field, browse for and select the image file.
This image file must have the
file. It also must reside on a Primary Server in the Management Zone.
3 Select a number in the File Set field.
For information on file sets, see
4 Click OK to create the new ZENworks Image action.
A.4.2 Editing a ZENworks Image
1 In the Action Name field, edit the existing name as needed.
2 In the ZENworks Image File field, browse for and select a different valid image file.
3 To change the file set, select a different number in the File Set field.
For information on file sets, see
4 Click OK to save the changes.
filename extension, meaning it is a valid ZENworks image
.zmg
Appendix B, "File Sets and Image Numbers," on page
Appendix B, "File Sets and Image Numbers," on page
155.
155.
Preboot Actions 151