Defining A Content Replication Schedule - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - INSTALLATION GUIDE 07-20-2009 Installation Manual

For example, if the Novell ZENworks Management Daemon is not running, use the
following command to start it:
/etc/init.d/novell-zmd start
For additional information about the ZENworks services, see
Novell ZENworks 7.27.3 Linux Management Administration
13b Access the ZENworks Control Center using the following URL:
https://ZENworks_Primary_Server_Address
Replace ZENworks_Primary_Server_Address with the IP address or DNS name of the
Primary Server.
After you are in the Control Center, you can click the Devices tab, then click the Servers
folder to view your ZENworks Secondary Server.
14 Repeat the steps in this section to set up additional Secondary Servers.
or
Continue with the next section,

6.3 Defining a Content Replication Schedule

When you define an package for delivery to managed devices within you system, the package is
physically added to the package repository on the Primary Server. To ensure that packages are
available on each ZENworks Server, you need to establish a schedule for replicating the packages
from your Primary Server to your Secondary Servers. By default, no schedule is defined, which
means that no replication can take place until you define the schedule.
1 Access the ZENworks Control Center by using the following URL:
https://ZENworks_Primary_Server_Address
Replace ZENworks_Primary_Server_Address with the IP address or DNS name of the Primary
Server.
2 Click the Configuration tab.
3 In the Management Zone Settings list, click Content Replication Schedule to display the
Content Replication Schedule page.
The Content Replication Schedule page determines how often bundles are replicated from the
Primary Server to all Secondary Servers in the Management Zone. During replication of a
bundle, only a new packages and updates to existing packages are sent.
4 Select a schedule type from the drop-down list.
The following schedules are available:
Schedule Type
"No Schedule"
"Date Specific"
"Day of the Week Specific"
Defining a Content Replication
Description
Use this option to indicate no schedule. The content is not replicated
to the secondary servers.
Select one or more dates on which to replicate the content to
secondary servers and set other restrictions that might apply.
Select one or more days of the week on which to replicate content to
secondary servers and set other restrictions that might apply.
"ZENworks Services" in the
Guide.
Schedule.
Installing a ZENworks Secondary Server 51