Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual page 30

Processes:
1. When the device sees tag 60 in the DHCP response, the PXE BIOS reissues the DHCP request
on port 4011.
2. The Proxy DHCP server responds on port 68 with the name of the bootstrap program
(
nvlnbp.sys
3. Continue with
Phases 2 through 8: Continuing the Process
The following sections explain how the Preboot Services process continues after Phase 1:
"Phase 2" on page 30
"Phase 3" on page 31
"Phase 4" on page 31
"Phase 5" on page 32
"Phase 6" on page 32
"Phase 7" on page 33
"Phase 8" on page 33
Phase 2
Figure 1-4
Imaging
Server
Processes:
1. The PXE BIOS requests
2. The TFTP server sends
3. The PXE device loads
30 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
) and the IP address of the TFTP service or daemon where it can be found.
"Phases 2 through 8: Continuing the Process" on page
Phase 2 of the Preboot Services Process
novell-pbserv
novell-zmgprebootpolicy
2
novell-tftp
novell-proxydhcp
nvlnbp.sys
nvlnbp.sys
nvlnbp.sys
Data
Model
nvlnbp.sys
nvlnbp.sys
1
PXE BIOS
from the TFTP server.
to the PXE device.
into memory.
30.
PXE Device
3