Table of Contents
Advertisement
Modify any of the following Network settings you want to change:
Enter a new ES in the Host name text field. For example, garp.mycompany.com
Enter a new ES address in the IP address text field. For example, 192.168.153.35
Enter a new netmask in the Network mask text field. For example, 255.255.255.0
Enter a new gateway in the Gateway IP address text field. For example
192.168.153.2
Enter one or more DNS resolver IP addresses, separated by commas, semicolons, or spaces in
the DNS IP addresses text box. For example: 10.0.16.100,10.0.1.1
NOTE: The Novell ZENworks Network Access Control ESs host name must be a fully qualified
domain name (FQDN). For example, the FQDN should include the host and the domain name—
including the top-level domain.
For example, waldo.mycompany.com. Select names that are short, easy to remember, have no
spaces or underscores, and the first and last character cannot be a dash (-).
NOTE: You cannot change the ES IP address for a single-server installation. You can change the
MS IP address for a single-server installation.
3.4.5 Changing the ES Date and Time
To change the ES date and time:
Home window>>System configuration>>Enforcement clusters & servers>>Select an
ES>>Configuration
1 Select a Region from the Region drop-down list in the Date and time area.
2 Select a time zone from the Time zone drop-down list.
3 Click ok.
NOTE: See
Section 3.5.7, "Selecting the Time Zone," on page 55
time zone settings for the MS.
WARNING: Manually changing the date/time by a large amount (other than a time zone change)
will require a restart of all servers. Rolling back the clock will have adverse effects on the system.
3.4.6 Modifying the ES SNMP Settings
To change the ES SNMP settings:
Home window>>System configuration>>Enforcement clusters & servers>>Select an
ES>>Configuration
1 Select the Enable SNMP check box.
for information on changing the
System Configuration
47
Advertisement
Table of Contents
