Viewing Information About Imaging Requests - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

Script Arguments
Table E-13
Argument Function
start For Linux, starts the daemon.
Because novell-proxydhcp is optional, use this argument to start this service or
daemon. However, this daemon does not automatically start when the server
reboots. (See
For Windows, open the Services dialog box, right-click the Novell service, then
select Start.
start setjustimagedflag (Linux only) For novell-ziswin only, sets the Just Imaged flag so that a device
can be imaged by using its existing image-safe data.
stop For Linux, stops the daemon.
For Windows, open the Services dialog box, right-click the Novell service, then
select Stop.
restart Stops and restarts the service or daemon if it is already running.
For Windows, open the Services dialog box, right-click the Novell service, then
select Restart.
force-reload (Linux only) Causes the daemon's configuration file to be reloaded.
status For Linux, displays the current status of the service or daemon.
For example, if you enter
information similar to the following is returned:
Novell ZENworks Imaging Service running
On Windows, open the Services dialog box and review the Status column.
showpid (Linux only) Displays the daemon's process ID.
For example, if you enter
information similar to the following is returned:
Novell ZENworks Imaging Service running
10211
install (Linux only) For novell-proxydhcp only, causes the daemon to be automatically
loaded when the server boots.
E.8.2 Viewing Information About Imaging Requests
After the Imaging Server has started, you can view information about the status and results of the
imaging requests that it has received from imaging clients. A statistical summary of these requests is
shown on the server's command line. The statistics shown on this screen are explained below. All
statistics are reset to zero if you restart the Imaging Server.
To view the multicast imaging information, at the server's command line enter:
Windows:
%ZENWORKS_HOME%\bin\preboot\zmgcast.exe -status
Linux:
/opt/novell/zenworks/preboot/bin/novell-zmgmcast -status
install below.)
/etc/init.d/novell-pbserv status
/etc/init.d/novell-pbserv showpid
,
,
Imaging Utilities and Components 215