Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual page 91

Server Referral List Configuration Tasks
Table 2-11
Task Steps
Add a server to the 1. In the List of Server IP Addresses
server referral list
2. Repeat as necessary to complete
Edit a listed server 1. Select a server in the list, then click
2. In the Edit String dialog box, edit
Rearrange the order 1. Select one server, then click either
of the servers in the
server referral list
2. Repeat as necessary to arrange
Remove servers 1. Select one or more servers, then
from the server
referral list
Configuring ZENworks Mixed Environment Imaging Servers
After you have specified all of the necessary servers in the server referral list, you must place certain
files into the directories of each ZENworks 7.x Imaging Server in the list in order for the
tftp
referrals to work with those traditional ZENworks Imaging Servers.
Do one of the following:
"Copy from ZENworks 10 Windows to ZENworks 7 NetWare or Windows" on page 91
"Copy from ZENworks 10 Windows to ZENworks 7 Linux" on page 92
"Copy from ZENworks 10 Linux to ZENworks 7 NetWare or Windows" on page 92
"Copy from ZENworks 10 Linux to ZENworks 7 Linux" on page 93
Copy from ZENworks 10 Windows to ZENworks 7 NetWare or Windows
From the ZENworks 10 Windows Imaging Server, copy the following files:
Location
%ZENWORKS_HOME%\share\tftp
and DNS Names field, specify the
DNS name or IP address of a
server that can host preboot
operations, then click Add to place
it into the list.
the list of servers in your
environment capable of preboot
operations.
Edit.
the IP address or DNS name that
is displayed there, then click OK to
save the changes.
Move Up or Move Down.
the order of the servers.
click Remove.
Additional Details
You can add a range of IP addresses by
typing the beginning IP address, type a
space, a dash, another space, then type
the ending IP address of the range.
However, these are displayed as you
typed them when you click Add; the
addresses within the range do not
separate into individual IP addresses in
the list.
You cannot move multiple servers at
one time.
You can use the Ctrl or Shift keys to
select multiple servers to remove them
from the list.
Files
memdisk
nvlnbp.sys
pxelinux.0
Setting Up Preboot Services and Imaging 91