Modifying Volumes; Deleting Volumes; Mounting Volumes - Novell NETWARE 6-DOCUMENTATION Manual

Modifying Volumes

Deleting Volumes

Mounting Volumes

To create a volume, select Free Space and click Create. Type the name of the
volume and click OK.
To allocate only a portion of the selected free space to the volume, type the
amount of space to use and click Apply to Volume.
The size of any existing volume can be increased but not decreased. To
decrease the size of an existing volume, the volume must be deleted and re-
created.
To add to the size of a volume, select an additional free space, type the amount
of space to use, and click Apply to Volume.
You can delete any volume you have created except volume SYS:. When a
volume is deleted, all data on the volume is lost.
In order for volumes to be accessed by NetWare, they must be mounted.
Volumes can be mounted immediately or at the end of installation.
Setting Up NetWare 6
51