Imaging Operations In A Zenworks Asset Management Agent And Zenworks Desktop Management Agent Coexistence Environment; Taking An Image Of A Device That Has The Zdm 7.X Agent And The Zenworks Adaptive Agent With Asset Management Installed - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

Imaging Operations in a
4
ZENworks Asset Management
Agent and ZENworks Desktop
Management Agent Coexistence
Environment
®
If the ZENworks Adaptive Agent with Asset Management and the ZENworks 7.x Desktop
Management (ZDM 7.x) Agent coexist in your environment, the ZENworks Configuration
Management managed device is registered to the ZENworks server with the same device GUID as
the ZDM 7.x Agent GUID.
For more information on deploying the ZENworks Adaptive Agent to devices that have the ZDM
7.x Agent installed, see
ZENworks 10 Configuration Management Discovery, Deployment, and Retirement
Refer to the following sections for information about the imaging operations from the ZDM 7.x
server:
Section 4.1, "Taking an Image of a Device that has the ZDM 7.x Agent and the ZENworks
Adaptive Agent with Asset Management Installed," on page 143
Section 4.2, "Restoring the Image," on page 144
4.1 Taking an Image of a Device that has the ZDM
7.x Agent and the ZENworks Adaptive Agent with
Asset Management Installed
1 At the command prompt of the managed device that has the ZDM 7.x agent and the ZENworks
Adaptive Agent with Asset Management installed, run the following command:
zac fsg –d
This takes a backup of DeviceGUID and DeviceID files, and subsequently deletes the files. The
file is created in
.sav
2 Launch ConsoleOne
managed device.
3 Reboot the managed device in the PXE mode.
An image of the device is taken and it is saved in the location that you specified while creating
the task to take an image in
Imaging Operations in a ZENworks Asset Management Agent and ZENworks Desktop Management Agent
Coexisting with the ZENworks Desktop Management Agent
zenworks_installation_directory/novell/zenworks
®
on the ZDM 7.x server, and create a task to take an image of the
Step 2.
4
in the
Reference.
.
143