Saving Image Changes And Exiting The Utility; Managing Image Properties - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

E.1.6 Saving Image Changes and Exiting the Utility
To save your changes when exiting the utility:
1 Click File > Save or Save As.
For Windows, the default image location should open (
For Linux, the file browser opens to the
images
If you have a subdirectory structure under
file.
2 Click File > Exit to close the utility.
If you create a new image file in Image Explorer, then select a
including the shortcut file, the file it points to is saved in the image.
For example, you open Image Explorer, click File > New, select a partition, click Image > Add Files,
select a shortcut file that points to
the file that points to
.lnk
E.1.7 Managing Image Properties
You can view the properties of an image file or any item in its content, including modifying some of
the properties:
"Viewing and Modifying the Properties of the Image File" on page 184
"Viewing the Properties of an Image File Item" on page 185
"Changing a Partition's Size" on page 185
Viewing and Modifying the Properties of the Image File
1 Click File > Open.
For Windows, the default image location should open (
For Linux, the file browser opens to the
images
2 Browse for and select the image file.
Large image files might take a few moments to open.
3 Select the top line of the opened image file.
This is the line that displays the path to the
4 Click File > Properties.
You can also right-click the top line, then select Properties.
5 (Optional) Fill in the fields:
Description: Specify useful information, such as its purpose or its important content.
Author: Specify the author of this version of the image.
Comments: Specify any information that is helpful.
184 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
directory for saving the file.
services.msc
services.msc
directory to access the image file.
...\content-repo\images
directory; you need to click the
.../content-repo
, browse for the location to save the image
images
.lnk
, then save the new image file. Instead of including
, itself is contained in the image.
services.msc
...\content-repo\images
directory; you need to click the
.../content-repo
file.
.zmg
).
file for the image, instead of
).
/
/