Restoring A Locally Stored Image - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

D.4.4 Restoring a Locally Stored Image
The Novell ZENworks Third Party Imaging utility allows you to restore a locally stored image on
the device.
1 (Optional) If you want to change the destination disk structure before restoring a WIM image,
perform the tasks explained in
Restoring a WIM Image," on page
2 Click the Imaging menu > Restore Image > Local.
The Restore Image window is displayed.
3 In the Image File Path field, specify or click Browse to browse for and select the directory
containing the Windows Imaging Format (
restored.
4 (Conditional) If you want to restore the
4a Select the Restore as Add-On option.
4b Configure the following settings:
Image Number: Select the index number of the image to be restored.
Path to Restore the Add-on Image: Specify or click Browse to browse for and
select the location on the device where you want to restore the add-on image.
4c Click OK.
5 (Conditional) If you want to perform any of the following operations, select Advanced Options
and click Next to display the Select Partition window.
Restore an image that is stored on a local disk, and not on a removable or CD-ROM drive.
Restore a base image taken by using ImageX or Ghost.
Selective partition imaging.
View the image information and modify the disk partitions accordingly.
NOTE: The Advanced Options is available only if you are restoring a Ghost image taken by
using ZENworks 10 Configuration Management (through ZENworks Control Center or the
Novell ZENworks Third-Party Imaging utility).
The Advanced Options is not available for the WIM Imaging format if you select the Restore as
Add-On option.
6 (Conditional) If you select Advanced Options in
Section D.5, "Configuring the Destination Disk Structure Before
177.
) or the Ghost imaging format (
.wim
file as an add-on image:
.wim
Step 5, configure the Select Partition window.
) file to be
.gho
Third-Party Imaging 173