Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual page 102

Description: Enter information to help you later recognize the purpose and scope of this image
bundle. For example, "Image taken after the OS was installed, but before GroupWise
installed."
8 Click Next to display the Summary page.
9 If you want to perform other configuration tasks after the bundle has been created, select the
Define Additional Properties check box.
For example, you can make assignments to the bundle in the Relationships tab, add actions in
the Actions tab, and so on.
10 Review the configuration, then click one of the following:
Back: Allows you to make changes after reviewing the summary.
Finish: Click to take the image. If you completed
when it is created.
The images are stored in
Primary Server and in
Primary Server, or on the device that is promoted to the Imaging Server role. However, the
ZENworks images are not replicated from the Primary Server to other Primary Servers or Satellites.
If the images are taken in the Ghost format, ZENworks 10 Configuration Management additionally
creates an XML file with the filename as
image file. You must not edit the xml file. If you are taking an image of a device that has multiple
disks, an image file is created for each disk and only one XML file is created per image.
If you want to move a Ghost image to a different location, you must move all the image files and the
XML file specific to the image.
This base image can be used in
Bundle for Automatic Imaging" on page
To create an add-on image of files selected from a file system for use in
"Creating an Add-On Image from Files in a File System" on page
Creating an Add-On Image for an Existing Bundle
For the current bundle, you can create the installed version as a ZENworks add-on image. This is not
supported for Third-Party Image bundle formats.
Add-on images of bundles are useful for incorporating predelivery of bundles when you are imaging
new devices, or when you are reimaging existing devices.
A newer version of the add-on image is automatically created when the bundle's version number is
incremented.
The filename for the add-on bundle is automatically created and uses the following format:
bundle_name-bundle_UID-counter.zmg
where bundle_name is the name of the current bundle for which the add-on image is being created,
bundle_UID is a UID number generated for the image, and counter is a four-digit counter
(beginning with 0000) that is incremented each time the image is updated (that is, when the bundle's
version number is changed). All ZENworks image files end in
102 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
%ZENWORKS_HOME%\work\content-repo\images
/var/opt/novell/zenworks/content-repo/images
image_name-ghost.xml
Step 8 on page 104
103.
Step 7, the image is assigned to the bundle
in the same location as the
under "Configuring the ZENworks Image
Step 8 on page
111.
.
.zmg
®
was
on the Windows
on the Linux
104, see