Installing And Starting The Image Explorer On A Standalone Device - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

E.1.2 Installing and Starting the Image Explorer on a
Standalone Device
You can run ZENworks Configuration Management Image Explorer as a standalone application on
any device that has java installed.The standalone device need not have ZENworks Configuration
Management installed.
To install and start the Image Explorer on a standalone device:
1 Install Java JRE 1.5 or later.
On Windows: You can install Java JRE in one of the following ways:
Ensure that Java is configured in the system path variable.
On Linux: You can install Java JRE in one of the following ways:
2 Install the Image Explorer utility.
On Windows: Do one of the following:
On Linux: Insert the appropriate ZENworks 10 Configuration Management SP3
installation DVD, browse to the
zenworks-zmgexplorer-10.3.0-xxxxx.i586.rpm
3 Start the Image Explorer utility.
On Windows: Run the
On Linux: Do the following:
If Java is installed from the ZENworks 10 Configuration Management SP3 installation
DVD, run the following command:
/opt/novell/zenworks/preboot/bin/zmgexp
182 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
ZENworks 10 Configuration Management SP3 Installation DVD: Copy
\common\msi\novell-zenworks-jdk-1.5.0_21.msi
system drive, and run the installer.
Java Web site: Download and install Java JRE 1.5 or later from the
Resources for Java Technology Web site
ZENworks 10 Configuration Management SP3 Installation DVD: Install the
following RPMs located in the
jdk-1_5_0_21-linux-i586.rpm
novell-zenworks-java-links-1.5.0_21-1.noarch.rpm
Java Web site: Download and install Java JRE 1.5 or later from the
Resources for Java Technology Web site
Open a Web browser to the http://primary_server_IP_address_or_DNS_name/
zenworks-setup address, click the Imaging Tools tab, download
zmgexplorer-10.3.0.xxxxx.msi
zenworks-zmgexplorer-ZENworks_product_version.msi
Insert the appropriate ZENworks 10 Configuration Management SP3 installation
DVD, browse to the
\common\msi\
zmgexplorer-10.3.0.xxxxx.msi
installer.
system_drive\novell\zenworks\bin\preboot\zmgexp.bat
(http://java.sun.com/).
directory in the specified order:
\common\rpm
(http://java.sun.com/).
to the system drive, then double-click
directory, copy
to the system drive, then double-click the
directory, then double-click
\common\rpm\
.
from the DVD to the
Developer
Developer
novell-zenworks-
novell-
.
novell-zenworks-
novell-
file.