Parameter
IPAddress=
LIBRARY_NAME=
Novell-proxydhcp
Novell-proxydhcp provides PXE devices with the information that they require to be able to connect
to the ZENworks Preboot Services system.
Novell-proxydhcp is not started automatically when installing Configuration Management.
"Understanding the Novell-proxydhcp Components" on page 208
"Configuring novell-proxydhcp" on page 208
Understanding the Novell-proxydhcp Components
To initiate novell-proxydhcp, enter the following command:
Windows:
Linux:
/etc/init.d/novell-proxydhcp
Table E-7
lists the arguments for this command, the executable it starts, and the configuration file it
uses:
Novell-proxydhcp Command Details
Table E-7
Script Arguments:
Executable:
Linux Configuration
File:
Windows Configuration
File:
Configuring novell-proxydhcp
The novell-proxydhcp configuration file (
parameters.
208 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
Description
The IP address to be used by imaging for all communications. If nothing is
entered, novell-pbserv attempts to detect an IP address.
Can be used in a clustering environment to specify the IP address of the virtual
server.
Can also be used in a multiple-NIC environment to bind the Imaging Server to a
specific IP address.
By default, this is commented out.
Full path of the library to be loaded by the ZENWorks Imaging Service. If the
library name is not specified, then by default
from the
/opt/novell/zenworks/preboot/lib
By default, this is commented out.
%ZENWORKS_HOME%\bin\preboot\novell-proxydhcp.exe
start, stop, restart, force-reload, status, showpid, install (for descriptions of
these arguments, see
/opt/novell/bin/novell-proxydhcpd
/etc/opt/novell/novell-proxydhcp.conf
installation_path\novell\zenworks\conf\preboot\novell-
proxydhcpd.conf
libzenimgweb.so
"Understanding the Arguments" on page
novell-proxydhcp.conf
is loaded
directory.
214)
), contains the following
Need help?
Do you have a question about the ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 and is the answer not in the manual?
Questions and answers