Modifying Image Content; Creating An Add-On Image; Adding Directories And Files - Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - ADMINISTRATION GUIDE 09-25-2008 Administration Manual

31.7.7 Creating an Add-on Image

You can create an add-on image from existing directories and files on your system and add partitions
to the new add-on image.
1 Click File > New.
2 To add a partition, click the root of the image, click Image, then click Create Partition.
You cannot add a partition to an existing image.
3 Do any of the following to add content:
Browse to the directories and files you want the add-on image to contain, then drag or
copy the directories and files into the right pane from your file browser.
Click Image > Add Files and select the files to be added.
Click Image > Add Directory and select the directories to be added.
Click the Add Directory icon and select the directories to be added.
Click the Add File icon and select the files to be added.
4 Click File > Save As, then specify the filename of the add-on image, including the .zmg
filename extension.

31.8 Modifying Image Content

You can modify the content of an image file in the following ways:
Section 31.8.1, "Adding Directories and Files," on page 465
Section 31.8.2, "Creating a New Directory," on page 466
Section 31.8.3, "Creating a New Partition," on page 466
Section 31.8.4, "Resizing a Partition," on page 466

31.8.1 Adding Directories and Files

To add directories and files to the open image:
1 Click File > Open.
2 Browse for and select the image file.
Large image files might take a few moments to open.
3 Do any of the following to add content:
Browse for the directories and files you want the add-on image to contain, then drag or
copy the directories and files into the right pane from your file browser.
Click Image > Add Files and select the files to be added.
Click Image > Add Directory and select the directories to be added.
Click the Add Directory icon and select the directories to be added.
Click the Add File icon and select the files to be added.
4 Brows for and select the files or directory, then click Add or OK.
Imaging Utilities and Components 465