J Troubleshooting Preboot Services And Imaging; Preboot Services And Imaging Error Messages - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

Troubleshooting Preboot Services
J
and Imaging
The following sections provide solutions to the problems you might encounter while working with
® ®
Novell ZENworks 10 Configuration Management Preboot Services and Imaging:
Section J.1, "Preboot Services and Imaging Error Messages," on page 259
Section J.2, "Troubleshooting Preboot Services and Imaging Services," on page 261
J.1 Preboot Services and Imaging Error
Messages
This section contains detailed explanations of the error messages you might encounter when using
ZENworks 10 Configuration Management Preboot Services and Imaging.
"The Imaging agent is currently not installed to run during boot process of this computer" on
page 259
"No boot file found in the partition" on page 259
"Windows Automatic Installation Kit is not found on this system" on page 260
"Ghost reported back an error" on page 260
"Unable to connect to Preboot Server. The Product license might have expired" on page 260
The Imaging agent is currently not installed to run during boot process of this
computer
Source: ZENworks 10 Configuration Management; Preboot Services and Imaging.
Explanation: On Windows Vista, the zisdservice runs during the device boot instead of
ziswin. Consequently, the following message is displayed in the ziswin
window:
The Imaging agent is currently not installed to run during
boot process of this computer.
However, you can still successfully take and restore images through
ZENworks Control Center.
Action: Ignore the message.
No boot file found in the partition
Source: ZENworks 10 Configuration Management; Preboot Services and Imaging.
Explanation: The error message is displayed while restoring a WIM image that was taken by
using ImageX without specifying any /BOOT option.
Possible Cause: The WIM bundle does not contain the boot partition information.
Action: In the error message dialog box, click Yes to restore the image.
Troubleshooting Preboot Services and Imaging
J
259