Using The Zenworks Imaging Engine Menu For Help; Using The Imaging Maintenance Mode Prompt For Help; Automatic (Query For Work) Mode - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

In the ZENworks Imaging Engine menu, you can access help for legacy
Help > Legacy Command-line Options. The legacy commands still work, but the newer ZENworks
Configuration Management commands introduce added functionality.
To use the Help mode:
Section F.1.1, "Using the ZENworks Imaging Engine Menu for Help," on page 218
Section F.1.2, "Using the Imaging Maintenance Mode Prompt for Help," on page 218
F.1.1 Using the ZENworks Imaging Engine Menu for Help
1 To display the ZENworks Imaging Engine menu, enter:
img
2 Click Help to display the drop-down menu of help items.
3 Select a mode name to display the help for that mode command.
The help includes the possible syntaxes for the command under SYNOPSIS and explanations
for each command and parameter under OPTIONS.
F.1.2 Using the Imaging Maintenance Mode Prompt for Help
To display the help, enter:
img -help mode
where mode is the mode whose mode command you want help with.
Examples:
Help Mode Commands and Parameters
Table F-1
Example
img -help
img -help -m
img -help -p
F.2 Automatic (Query for Work) Mode
Use the
-auto
Services default settings. The ZENworks Imaging Engine runs in this mode if you let the imaging
boot process proceed without interruption, or if you type the command at the imaging maintenance
mode prompt.
In this mode, the ZENworks Imaging Engine queries the Imaging Server specified in the
PROXYADDR environment variable for any work to do. The Imaging Server checks the relevant
Preboot Services default settings to determine what imaging tasks should be performed (if any),
such as taking or restoring an image. It then instructs the ZENworks Imaging Engine to perform
those tasks.
218 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
Explanation
Displays a short description of all modes.
Displays information on how to use the Make mode.
Displays information on how to use the Partition mode.
mode command to image the device automatically, based on any applicable Preboot
commands by clicking
img