Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual page 140

IMPORTANT: In order to have bundles to select, the administrator user that you are
logged in as must have rights to modify devices and to apply bundles. For more
information on administrator rights, see "Administrators" in the
Configuration Management System Administration
Apply Rule-Based Imaging Bundle: This assigns the device to be imaged if it matches
any Imaging bundle that is based on rules.
Take an Image: Fill in the fields:
Image Format: Select the format of the image to be applied.
Server and Path of New Image File: Browse for or enter the full path to where you want
the image file saved. This option is displayed only for the ZENworks Image format.
Shared Network Path for Image File: Specify the shared-network path where you want
to save the .
SMB share, and you must have the Write permission to it. If the Novell File Upload
extension is not installed on the device, you must install it before you can browse to and
upload the file. This option is displayed only for the Windows Imaging Format (.
Image Filename Specify the filename to save the .
displayed only for the Windows Imaging Format (.
(
Network Credential: Click
for accessing the device that has
the Windows Imaging Format (.
Image Compression: Select one:
140 ZENworks 10 Configuration Management Preboot Services and Imaging Reference
or files. The directory must be a Windows share or a Linux CIFS or
wim .gho
).
.gho
Balanced: Automatically balances compression between an average of the
reimaging speed and the available disk space for the image file. This option is
displayed only for the ZENworks Image format
None: This option is displayed only for the Windows Imaging format (.
Ghost Imaging Format (
Optimize for Speed: Optimizes the compression to allow for the fastest reimaging
time. Use this option if CPU speed is an issue. By default, this option is selected.
Optimize for Space: Optimizes the compression to minimize the image file's size to
conserve disk space. This can cause reimaging to take longer.
Reference.
wim
wim
to browse for and select the network credentials to be used
or ( ) files. This option is displayed only for
.wim .gho
) and Ghost Imaging Format (
wim
).
.gho
ZENworks 10
or file. This option is
.gho
) and Ghost Imaging Format
).
.gho
wim
).
wim
) and