Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual page 269

Explanation: You have configured a master Primary Server whose
you want to replicate on all other servers at a specific schedule. Subsequently,
if you want to select a different server as the master Primary Server, the
following error message is displayed in the TFTP Replication Settings panel
when you click Apply after selecting the new server:
Unable to apply the TFTP Replication settings. Remove the
circular dependency for the Master Primary Server. For more
information, see the Help.
Action: In the TFTP Replication Settings panel, do the following
1 Before changing the master Primary Server for the tftp directory
2 Change the master Primary Server and configure a new TFTP replication
Unable to upload
winpe.wim
installation Kit
Source: ZENworks 10 Configuration Management; Preboot Services and Imaging.
Explanation: When you try to upload winpe.wim from the Windows 7 or Windows 2008
Automated installation Kit, the upload fails with the following error if a
previous unmount of the WIM file was not successful:
Unable to mount the selected WIM file
Action: Do one of the following:
replication, change the TFTP replication schedule for the existing
Primary Server to No Schedule.
schedule.
from the Windows 7 or Windows 2008 Automated
Unmount the existing version of the WIM file by running the following
ImageX unmount command:
imagex.exe /unmount %temp%\ZImaging\mount
Subsequently, upload
winpe.wim
Upload the from the Windows 7 or Windows 2008
winpe.wim
Automated installation Kit installed on a different device.
directory changes
tftp
.
Troubleshooting Preboot Services and Imaging 269